Using The Bluetooth Cellular Phone - JVC KD-PDR61 Bedienungsanleitung

• Select "Delete," then confirm the selection.
You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See
"Auto Connect" on page 33.)

Using the Bluetooth cellular phone

1
Select "BT-PHONE."
2 Enter Bluetooth menu.
3 Establish the connection with a device, then make a call (or settings
—
using the Bluetooth menu).
When a call comes in....
The source is automatically changed to "BT-PHONE."
When "Auto Answer" is activated....
The unit answers the incoming calls automatically, see
page 33.
• When "Auto Answer" is deactivated, press any
button (except
incoming call.
To end the call
Hold any button (except
• You can adjust the microphone volume level (see
page 33).
16
/control dial) to answer the
/control dial).
Press number button 3 to
select "No" or return to the
previous screen.
When an SMS comes in....
If the cellular phone is compatible with SMS (Short
Message Service) and "Message Info" is set to "Auto"
(see page 33), the unit rings and "Received Message"
appears on the display to inform you of the message
arrival.