Using The Bluetooth Cellular Phone; Making A Call - JVC KD-R801 Bedienungsanleitung

Connecting a registered device
1
Select <Connect Phone> or
<Connect Audio>.
[Turn]
2
Select a device you want to connect.
[Turn]
"Connecting..." appears, then "Connected [Device
Name]" appears on the display when the device is
connected.
Disconnecting a registered device
Select <Disconnect Phone> or
<Disconnect Audio>.
[Turn]
"Disconnecting" appears, then "Disconnected [Device
Name]" appears on the display when the device is
disconnected.
Using the Bluetooth cellular
phone

Making a call

1
Enter "Call Menu" screen.
2
Select the method to make a call.
[Turn]
=
[Press]
=
[Press]
=
[Press]
=
[Press]
• "Dialed Calls" *: Shows the list of the phone
numbers you have dialed. Go to the following
step.
• "Received Calls" *: Shows the list of the
received calls. Go to the following step.
• "Missed Calls" *: Shows the list of the missed
calls. Go to the following step.
• "Phonebook": Shows the name/phone
number of the phone book of the unit. Go to the
following step. To copy the phone book memory,
see pages 33 and 34.
• "Dial Number": Shows the "Dial Number"
screen. See "How to enter phone number" on the
following.
• "Voice Dial" (Only accessible when the
connected cellular phone has the voice
recognition system): Speak the name (registered
words) you want to call.
* Displays only when the dialed or received number
is made through the unit. See also page 34 for
" Phonebook Select" settings.
3
Select the name/phone number you want to
call.
[Turn]
• When the sound is stopped or interrupted during the
use of a Bluetooth device, turn off, then turn on the
unit.
– If the sound is not yet restored, connect the device
again. (See "Connecting a registered device" on the
left column.)
How to enter phone number
1
Select a number.
OPERATIONS
=
[Press]
Continued on the next page
17