JVC KD-PDR61 Bedienungsanleitung Seite 39

Symptoms
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc cannot be played back.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be
skipped.
• Disc can neither be played back nor ejected. • Unlock the disc (see page 11).
• Disc sound is sometimes interrupted.
• Disc cannot be recognized ("No Disc,"
"CD Loading Error," or "Eject Error" flashes).
• "Please Eject" appears on the display.
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required
("Reading" keeps flashing on the display).
• Tracks do not play back in the order you
have intended them to play.
• The elapsed playing time is not correct.
• "Please Eject" appears on the display.
• "Not Support" appears on the display and
track skips.
• Correct characters are not displayed (e.g.
album name).
Remedies/Causes
Store stations manually.
Connect the aerial firmly.
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which
you used for recording.
• Eject the disc forcibly (see page 3).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Eject the disc forcibly (see page 3).
This occurs sometimes due to over-heating. Eject the disc
or change to another playback source.
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the
file names.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined when the files are
recorded.
This sometimes occurs during playback. This is caused
by how the tracks are recorded on the disc (eg. variable
bit rate).
Insert a disc that contains MP3/WMA tracks.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of symbols
(see page 38).
Continued on the next page
REFERENCES 39