To Tune In Fm Stations Only With Strong Signals-Lo/Dx (Local/Distance-Extreme); Storing Stations In Memory - JVC KD-SHX751 Bedienungsanleitung

4
Finish the procedure.
To restore the stereo effect, repeat the same
procedure and select "Off" on step 3.
To tune in FM stations only with
strong signals—LO/DX (Local/
Distance-extreme)
If received signals are weak, you may only
hear noises. You can make this unit detect only
stations with sufficient signal strength while
searching for FM stations.
1
Enter the MODE menu (see page 5).
2
Select "LO/DX."
3
Select "Local."
• DX: To tune in to all receivable stations.
indicator lights up.
• Local: To tune in to only stations with
sufficient signal strength.
indicator lights up.
4
Finish the procedure.
DX
Local

Storing stations in memory

You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
SOURCE
2
Select the FM band (FM1 – FM3)
you want to store into.
BACK
BAND
3
Enter the MODE menu (see page 5).
4
Select "SSM."
5
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
To be continued....
11