Dab Tuner Operations; Storing Dab Services In Memory; Tuning In To A Preset Dab Service - JVC KD-G632 Bedienungsanleitung

DAB tuner operations

What is DAB system?
Digital Audio Broadcasting (DAB) can deliver digital
quality sound without any annoying interference
and signal distortion. Furthermore, it can carry text,
pictures, and data. When transmitting, DAB combines
several programmes (called "services") to form one
"ensemble." In addition, each "service"—called
"primary service"—can also be divided into its
components (called "secondary service"). A typical
ensemble has six or more programmes (services)
broadcast at the same time.
By connecting the DAB tuner, this unit can do the
following:
• Tracing the same programme automatically
—Alternative Frequency Reception (see "DAB AF" on
page 16).
It is recommended to use DAB tuner KT-DB1000
with your unit. If you have another DAB tuner,
consult your JVC IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied for your DAB
tuner.
~
Ÿ
!
Start searching for an ensemble.
⁄
Select a service (either primary or
secondary) to listen to.
18
When an ensemble is received,
searching stops.
To stop searching, press the
same button again.
To tune in to an ensemble manually
Start searching for an ensemble, as in step
left column.
1
2
Select a desired ensemble frequency.

Storing DAB services in memory

You can preset six DAB services (primary) for each band.
1
Select a service you want (see steps ~ to ⁄
on the left column).
2
Select the preset number (1 – 6) you want to
store into.
Preset number flashes for a while.

Tuning in to a preset DAB service

1
2
Select the preset DAB service (primary)
number (1 – 6) you want.
If the selected primary service has some secondary
services, pressing the same button again will tune
in to the secondary services.
!
on the
P4