Adjusting The Sound; General Settings - Psm - JVC KD-G632 Bedienungsanleitung

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
1
BAS* (bass), [–06 to +06]
Adjust the bass.
1
MID* (mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
1
TRE* (treble), [–06 to +06]
Adjust the treble.
2
FAD* (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
1
LOUD* (loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a well-
balanced sound at low volume level.
VOL (volume), [00 to 30 or 50*
Adjust the volume.
*
When you adjust the bass, mid-range, treble, or
1
loudness, the adjustment you have made is stored
for the currently selected sound mode (iEQ) including
"USER."
*
If you are using a two-speaker system, set the fader
2
level to "00."
*
Depending on the amplifier gain control setting. (See
3
page 17 for details.)
3
]
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps and
2
items if necessary.
5
Finish the procedure.
to adjust other PSM
3
Continued on the next page
15