JVC KD-G632 Bedienungsanleitung Seite 27

Symptoms
• Noise is generated.
• "CHECK" keeps flashing on the display.
• Tracks/folders do not play back in the order
you have intended them to play.
• "NO FILE" flashes on the display.
• "NO USB" appears on the display.
• "READ" and "FAILED" appear alternately on
the display.
• Correct characters are not displayed (e.g.
album name).
• While playing a track, sound is sometimes
interrupted.
• "NO DISC" appears on the display.
• "NO MAG" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on the
display.
• The CD changer does not work at all.
• "noSIGNAL" appears on the display.
• "RESET 8" appears on the display.
• "ANTENANG" appears on the display.
• The DAB tuner does not work at all.
Remedies/Causes
The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
• Readout time varies depending on the USB memory.
• Do not use too many hierarchy, folders, and empty
folders*.
• Turn off the power then on again.
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA track.
Playback order is determined by the write-in time stamp.
The first track/folder written into the USB memory will be
the first track/folder for playback.
Attach a USB memory that contains tracks encoded in an
appropriate format.
The total number of tracks could not be accessed
properly.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
MP3/WMA tracks have not been properly copied into the
USB memory.
Copy MP3/WMA tracks again into the USB memory, and
try again.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
Press the reset button of the CD changer.
Reset the unit (see page 2).
Move to an area with stronger signals.
Connect this unit and the DAB tuner correctly and reset
the unit (see page 2).
Check the cords and connections.
Reconnect this unit and the DAB tuner correctly and reset
the unit (see page 2).
Continued on the next page
27