Output Of Black-White/Color Switching Signal - JVC TK-C1460 Bedienungsanleitung

Output of Black-White/Color switching signal

It is possible to output black-White/color switching signal from the AUX terminal on the back
of this unit.
MENU button
MENU
B&W/COLOUR MODE
B&W
L E V E L
MODE S EL E C T
CAMERA T I T L E ED I T . .
RE V ERS E MODE
AL M . T I T L E S Z E
AL ARM COLOUR
AU X T E R M I N A L
D. Z O O M M A X
CAUTION:
When you use near infrared ray illumi-
nations, use a lens that is compatible
with the near infrared ray illuminations.
Any lens other than the compatible one
can result in out-of-focus due to such
characteristics.
E-40
SET button
SET
CAMERA
SETUP
AWC
AUX
NORMAL
OF F
I DOUBLE
WH I T E
B&W OUT
x2
Set the B&W Item to AUTO.
1.
Select the B&W/COLOR MODE item on
the ALC SETTING screen.
2.
Press the SET button.
The B&W/COLOR MODE screen
appears.
3.
Press either the
button and select the B&W item.
4.
Press either the
button and set to "AUTO".
5.
Upon completion of setting, press the
MENU button twice.
Then, the MAIN MENU screen is
brought back.
Set the AUX TERMINAL Item to
B&W OUT.
1.
Select MODE SELECT on the MAIN
MENU screen.
2.
Press the SET button.
The MODE SELECT screen appears.
3.
Press either the
button and select the AUX TERMINAL
item.
4.
Press either the
button and set to "B&W OUT".
5.
Upon completion of setting, press the
MENU button twice.
• Then, the normal screen is brought
back.
MEMO
• When you use infrared illumination, if the
subject excessively reflects, a B/W screen
can switch to a color screen.
To perform switching with higher accuracy,
we recommend that you use it by the setting
mentioned in [Control by Black-White/Color
Switching Signal From the Outside],
referring to Page 41.
button or the
button or the
button or the
button or the