How To Reset Your Unit; How To Forcibly Eject A Disc - JVC KD-G511 Bedienungsanleitung

Please read all instructions carefully before operation, to ensure your complete understanding and to
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
If you need to operate the receiver while
driving, be sure to look ahead carefully or
you may be involved in a traffic accident.

How to reset your unit

This will reset the microcomputer. Your
preset adjustments will also be erased.
For security reasons, a numbered ID card is provided with this receiver, and the same ID number is
imprinted on the receiver's chassis. Keep the card in a safe place, as it will help the authorities to
identify your receiver if stolen.
2
Thank you for purchasing a JVC product.
obtain the best possible performance from the unit.

How to forcibly eject a disc

If a disc cannot be recognized by the
receiver or cannot be ejected, ejects the disc
as follows.
"PLEASE" and "EJECT" appear alternately
on the display.
• If this does not work, try to reset your
receiver.
• Be careful not to drop the disc when it
ejects.