Measuring Process; A) Air Temperature And Humidity Measurement; B) Wood Moisture Measurement "Wood - VOLTCRAFT 40 92 36 Bedienungsanleitung

11. MEASURING PROCESS

To measure humidity in materials, push the two measuring prods "2" into the material carefully.
During measurement, the symbol "%" fl ashes. If the symbol remains lit permanently, the
precise measuring value is available in the digital display for humidity "8".
The bar scale "9" symbolically illustrates this value.
Additionally, the bar chart "4" saves the min and max values.
To delete these values, briefl y push the button "CLR".
To set the materials, follow the instructions in the next chapters.

a) Air Temperature and Humidity Measurement

After activation of the meter, the LC display shows the currently measured humidity "10".
Push the button "SET" for at least 2 seconds. The display switches to the currently measured
humidity "10".

b) Wood Moisture Measurement "WOOD"

After activation, the LC display automatically shows "WOOD" for wood moisture measurement.
There are three different pre-set characteristic curves ("W1" – "W2" – "W3"). Select the right
characteristic curve by pushing the "SET" button.
The correct characteristic curve for your material can be taken from the following table.
37