- Electronic devices and accessories do not belong into the hands
of children!
- In commercial institutions, make sure you observe the accident
prevention regulations of the commercial trade organization for
electric installations.
- In schools, training facilities, hobby and self-help workshops,
qualified personnel needs to supervise the operation of chargers
and accessories.
Only put the loader into operation when the housing is closed and
screwed shut.
- Chargers may not be operated unsupervised.
- Avoid operating the charger under adverse conditions. This leads
to damages of the sensitive electronics inside the charger and
may thus pose a risk to the operator's life. Adverse conditions are:
- Excess air humidity (> 75% rel. condensing)
- Dampness
- Dust or flammable gasses, vapors or solvents.
- Excess ambient temperature (> approx. +40°C)
- Strong electromagnetic (motors or transformers) respectively
electrostatic (charge) fields
- When charging accumulators, observe the charging instructions
of the respective manufacturers.
- In case of improper handling (excess charging voltages or wrong
polarity) the accumulator may be overcharged respectively dest-
royed. In the worst case, the accumulator may explode and cau-
se substantial damage.
- Keep transmitting devices (cell phones, transmitters for model
construction, etc.) away from the charger because the radiation
the transmitter emits may lead to interruptions respectively the
destruction of the charger and thus the accumulators.
- Defect/no longer chargeable accumulators need to be disposed
of properly (collection points) and do not belong into the house-
hold waste.
16
Indications pour nettoyage:
Les contacts des accumulateurs, ainsi que du chargeur doivent tou-
jours rester propres.
Protéger le chargeur des effets directs de l´eau et éviter une trop
humidité de l´air trop élevée.
Protéger le chargeur contre les huiles, les graisses et nettoyants
agressifs, les diluant, le boîtier pouvant être endommagé.
Débrancher toujours le chargeur des accumulateurs et de la pile
d´alimentation ou du secteur en cas de non utilisation, de nettoyage
et d´entretien.
Attention !
Observer impérativement les indications / consignes
de charge des constructeurs d´accumulateurs.
Elimination des éléments usés
Si le chargeur est devenu inutilisable (irréparable), il convient alors
de procéder à son élimination conformément aux prescriptions
légales en vigueur.
Dépannage
Avec le multichargeur, vous avez acquis un produit à la pointe du
développement technique et bénéficiant d'une grande sécurité de
fonctionnement. Il est toutefois possible que des problèmes ou des
pannes surviennent. Vous trouverez ci-après un certain nombre de
procédures vous permettant de remédier assez facilement à quel-
ques-uns des problèmes éventuels ; Observez absolument les con-
signes de sécurité !
29