Repeating Keystrokes; Dos Key Functions Not Available On The Mx2 - LXE MX2 Benutzerhandbuch

Tastatur (48 Tasten) (Not Translated)
The MX2 with 48-key keypad has a few keys that are not found on a standard computer keyboard.
These keys are shown in the following table:
Note:

Repeating Keystrokes

The 48-key keypad supports repeating keystrokes:

DOS Key Functions Not Available on the MX2

Prnt Scrn
Sys Req
E-EQ-MX2OGDE-F-ARC
Key Default Use
Power key. Turn the unit on and off.
Backlight key. Turns the backlight on and off in
the display.
FN key. Outputs the symbol or activates the
function (F6 - F10) above the next key pressed.
Contrast Up key. Increases the contrast of the
display.
Contrast down key. Decreases the contrast of the
display.
There is no Scan key on the 48-key keypad.
•
Press and hold the desired key to repeat a keystroke.
•
After a brief delay, the keystroke is automatically repeated until the key is released.
A function that is available at the DOS prompt on a desktop PC. The Prnt Scrn as a
system function requires a parallel port and the MX2 has only serial ports.
A function that is available at the DOS prompt on a desktop PC. Sys Req is for use
in a multi-tasking environment to switch between various running applications. The
MX2 is not a multi-tasking computer, nor is DOS in general considered a multi-
tasking environment.
21
MX2 Benutzerhandbuch