Introduction; Intended Use - VOLTCRAFT 1090522 Bedienungsanleitung

Introduction

Dear Customer,
In purchasing this Voltcraft® product, you have made a very good decision for which
we should like to thank you.
You have acquired an above-average quality product from a brand family which has
distinguished itself in the field of measuring, charging and network technology by
particular competence and permanent innovation. With Voltcraft®, you will be able
to cope even with difficult tasks as an ambitious hobbyist just as much as a profes-
sional user. Voltcraft® offers you reliable technology at an extraordinarily favourable
cost-performance ratio. We are certain: Your start with Voltcraft will at the same time
be the commencement of a long and profitable co-operation. We wish you much
enjoyment with your new Voltcraft® product!
If there are any technical questions, contact:
Germany: Tel. no.:
Fax. no.:
E-mail:
Mon. to Thur. 8.00am to 4.30pm, Fri. 8.00am to 2.00pm
To maintain the specifications and to ensure risk-free operation, the user should
comply with the following operating instructions!

Intended Use

- Measuring direct voltages up to a maximum of 600VDC
- Measuring alternating voltages up to a maximum of 600VACrms
- Measuring direct or alternating currents up to a maximum of 20A, for a maximum
period of 10s with pauses of 15min between the single measurements
- Measuring capacities of up to a maximum of 100µF
- Measuring frequencies of up to 10MHz and measuring the pulse-pause-ratio (duty
cycle, informative)
- Measuring resistance values up to a maximum of 40 MOhm
- Testing diodes and checking the acoustic continuity
- Overvoltage category CAT III 600V
Use other than that described above will lead to damage to the measuring instru-
ment and additional risks, such as short circuit, fire, electric shock etc. No part of the
product may be changed or modified! The safety instructions should be observed
without fail!
+49 9604 / 40 88 80
+49 9604 / 40 88 48
tkb@conrad.de
21