Operation Telephone; Setting The Date And Time; Setting The Ringer Volume; Flash - Topcom phonemaster 180 Bedienungsanleitung

Phonemaster 180

3 OPERATION TELEPHONE

3.1 Setting the date and time

When you use the Phonemaster 180 for the first time, you can set the date and time or you press
the Erase button for 2 seconds.
• 'SET TIME' appears on the display and the hour indication on the display starts to blink.
• Enter the hour by means of the Up and Down buttons
• Confirm this setting by pressing the Erase button Ø.
• The minute indication starts to blink.
• Repeat these steps to set the minutes, the month and the day.
• After having set the month, press the OK button and the unit will return to standby mode.

3.2 Setting the ringer volume

The ringer volume can be set by means of the ring volume switch at the back of the phone.
You can choose between high 'Hi', Low 'Low' or no ringing signal 'OFF'.

3.3 Flash

Press the Flash button (R) to use certain services as 'Call Waiting' (if this service is provided by your
telephone company); or to transfer phone calls when you are using a telephone exchange (PABX).

3.4 Last number redial

If you want to look at one of the 3 last dialled telephone numbers, press the Redial button
• Select the desired telephone number by means of the Up and Down buttons
• When you have selected a number, pick up the handset or press the Handsfree button
The selected number will be dialled automatically.

3.5 Mute

It is possible to deactivate the microphone during a telephone conversation.
• Press the Mute button
Now you can talk freely without the caller hearing you.
• Press the Mute button

3.6 Phone Book

The Phonemaster 180 can save up to 100 telephone numbers (20 digits) and names (16 digits ) in
the Phone Book.

3.6.1 Using the Alphanumerical Keypad

Use the alphanumerical keypad to enter text. To select a letter, press the corresponding button. For
example, press the 'A' button twice to select the letter 'B'. If you want to select 'A' as well as 'B',
press the 'A' button first, wait for the cursor to go to the following position and then select 'B'.
Press the * button if you want to add a space. Wrongly entered characters can be erased by means
of the Down button
. The Mute symbol appears on the display.
again to resume the conversation.
.
.
31 31 31 31 31
.
.
.