Battery Empty Indication; Operation Telephone; Outgoing Calls; Making A Phone Call - Topcom cocoon 60 Bedienungsanleitung

Cocoon 60

3 Battery Empty indication

When the battery is empty, the handset no longer carries out operations.
When a battery is completely empty and you have put the handset on the
base unit for a short period of time, the Battery symbol will appear to be
fully charged but this is actually not the case. The battery capacity will
decrease rapidly. We advise you to put the handset on the base unit for the
entire night so that it can be recharged thoroughly.
• Full battery [
• Empty battery [
When you are in the middle of a conversation and the battery is almost
empty, the handset will emit a warning signal every 8 seconds. After
2 minutes the handset will be deactivated. Place the handset on the base
unit to charge (the keypad upwards).

4 Operation telephone

4.1 Outgoing calls

4.1.1 Making a phone call

• Press the Line button. You will hear the dial tone.
• Enter the desired telephone number.
• Press the Line button when you want to terminate the call.

4.1.2 Call setup with dial preparation

• Enter the desired telephone number. An incorrect number can be
corrected by means of the Mute button. When you haven't pressed a
button for 20 seconds, the number you've already entered will
disappear and the handset returns to standby mode.
• Press the Line button. The number will be dialled automatically.
• Press the Line button when you want to terminate the call.

4.2 Incoming calls

• When a call comes in, only the handset will start
to ring. The PHONE symbol
• Press the Line button to answer the incoming call.
• When you pick up the handset from the base unit you are immediately
connected to the caller. You do not need to press the Line button.
]
]
blinks on the display.
21