VOLTCRAFT B6 AC Bedienungsanleitung Seite 53

7. Starting the Program
Press and hold the ENTER button for 3 seconds to start the charging program.
LiPo BALANCE CHG
2.0A 11.1V(3S)
Before charging starts, the charger may take some time to detect the battery cell.
BATTERY CHECK
WAIT...
"R" shows the number of cells detected by the charger and "S" is the number of cells set by
you at the previous display. If both numbers are not identical, press the BATT/PROG button
to go back to previous display to reconfirm the number of cells in the battery pack before
going ahead.
R: 3SER S: 3SER
CONFIRM (ENTER)
During charging, real-time status can be checked in the display. See chapter 13 for details.
LP4s 1.5A 12.14V
BAL 000: 50 00022
8. Stopping the Program
During the charging process, press the BATT/PROG button to stop the process.
9. Program Complete
When the charging process finishes, an audible sound can be heard.
53