Troubleshooting - Küppersbusch IKEF3290-2 Bedienungsanleitung

TROUBLESHOOTING

WARNING! Refer to Safety
chapters.
What to do if...
Problem
The appliance does not op‐
erate.
The appliance is noisy.
Audible or visual alarm is
on.
A symbol or
is shown instead of numbers
on the Temperature Display.
A symbol is shown in‐
stead of numbers on the
Temperature Display.
The lamp does not work.
Possible cause
The appliance is switched
off.
The mains plug is not con‐
nected to the mains sock‐
et correctly.
There is no voltage in the
mains socket.
The appliance is not sup‐
ported properly.
The cabinet has been re‐
cently switched on or the
temperature is still too
high.
The temperature in the ap‐
pliance is too high.
The door is left open.
The temperature in the ap‐
pliance is too high.
Temperature sensor prob‐
symbol
lem.
Temperature sensor prob‐
lem.
The lamp is in stand-by.
Solution
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
Check if the appliance stands
stable.
Refer to "Door open alarm"or
"High temperature alarm".
Refer to "Door open alarm"or
"High temperature alarm".
Close the door.
Contact a qualified electrician
or contact the nearest Author‐
ised Service Centre.
Contact the nearest Author‐
ised Service Centre (the cool‐
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
Contact the nearest Author‐
ised Service Centre (the cool‐
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
Close and open the door.
45