Functional Description - Bosch PSM 18 LI Betriebsanleitung

OBJ_BUCH-1201-001.book Page 18 Monday, May 31, 2010 1:04 PM
18 | English
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water, and moisture. Danger of
explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
Use the battery only in conjunction with
your Bosch power tool. This measure alone
protects the battery against dangerous over-
load.
Use only original Bosch batteries with the
voltage listed on the nameplate of your
power tool. When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batter-
ies.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for dry sanding and
polishing of wood, filler and coated surfaces. It
is especially suitable for profiles, corners or
hard to reach locations.
2 609 004 215 | (31.5.10)
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Battery unlocking button
2 Battery *
3 Dust box, complete (micro filtersystem)
4 Sanding sheet*
5 Sanding plate
6 SDS button for release of the sanding plate
7 Battery charge-control indicator
8 On/Off switch
9 Handle (insulated gripping surface)
10 Extraction outlet
11 Filter element (micro filtersystem)
12 Extraction adapter*
13 Vacuum hose*
14 Pad extender*
15 Narrow pad extender*
16 Sanding plate for extender*
17 Narrow rounded pad extender*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Cordless Multi Sander
Article number
Rated voltage
No-load speed
No-load orbital stroke
rate
Sanding sheet surface
Orbit diameter
Weight according to
EPTA-Procedure
01/2003
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
PSM 18 LI
3 603 CA1 3..
V= 18
-1
min 11000
-1
min 22000
2
cm 104
mm 1.6
kg 1.3
Bosch Power Tools