Chauvin Arnoux PAC 22 Bedienungsanleitung Seite 14

English
PLEASE READ THE INSTRUCTION MANUAL BEFORE USING THE PRODUCT.
Thank you for purchasing a clamp for oscilloscope.
To obtain the best service from this instrument,
- read the instruction manual carefully and
- respect all necessary precautions that are required in the use of this instrument.
Only use the PAC 22 clamp indoors.
Do not expose the clamp to running water.
Do not use the PAC 22 clamp on conductors at a voltage of more than 600 V in relation
to the earth.
For measurements on DC current, check zero output. Adjust if necessary (see " Operating
procedure").
During measurement, ensure that the conductor is in line with the markings on the jaws
and that the clamp closes correctly.
Your clamp is supplied with a set of adhesive labels. Choose the label for your language
and stick it to the back of the case.
Unless notified to the contrary, our instruments are guaranteed from any manufacturing
defect or material defect. They do not bear the specification known as the safety specification.
Our guarantee, which may not under any circumstances exceed the amount of the invoiced
price, goes no further than the repair of our faulty equipment, carriage paid to our workshops.
It is applicable for normal use of our instruments, and does not apply to damage or destruction
caused, notably by error in mounting, mechanical accident, faulty maintenance, defective
use, overload or excess voltage.
Our responsability being strictly limited to the pure and simple replacement of the faulty parts
of our equipment, the buyer expressly renounces any attempt to find us responsible for
damages or losses caused directly or indirectly.
Our guarantee is applicable for twelve (12) months after the date on which the
equipment is made available. The repair, modification or replacement of a part during the
guarantee period will not result in this guarantee being extended.
SAFETY PRÉCAUTIONS
WARRANTY
13