Operating Elements And Connections - Omnitronic DR-1000 MK2 Bedienungsanleitung

4.3 Operating elements and connections

1
Power on/off
Press this button shortly to turn the receiver on. To avoid
accidental shutdown, you have to keep this button
pressed for 2 seconds to turn it off.
2 LCD
Indicates all functions of the receiver ( section Display).
3 Button O
For calling and exiting the manual frequency adjustment
and the automatic frequency scanning.
6 Strain relief for the power unit cable
7 Power input
Plug in the connection cable of the supplied power unit
here.
8 Unbalanced output
6.3 mm jack for connecting a line input of a mixer or
amplifier.
4
Buttons and
• For frequency adjustment.
• Button for activating/deactivating the lock function.
5 Level control
For adjusting level at the outputs AUDIO OUTPUT.
9 Balanced output
3-pin XLR jack for connecting a balanced microphone
input of a mixer or amplifier.
10 BNC antenna input jacks ANT.1 and ANT.2
For connecting the two included antennas.
18/24 00053645.DOC, Version 1.0