Connections; Rack Installation - Omnitronic DR-1000 Bedienungsanleitung

5. CONNECTIONS

Connect the wireless receiver via the Audio Out-socket and a standard microphone lead with a microphone
input socket of your mixer.
Adjust the antennas vertically.
Plug the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet.

5.1 Rack installation

For the DR-1000, a wide range of accessory is available. In this way, you can also install the device in a
rack.
Rack-installation: This device is built for 19" racks (483 mm). The rack you use should be a Double-Door-
Rack where you can open the frontpanel and the rear panel. The rack should be provided with a cooling fan.
13/33 00025923.DOC, Version 1.3