Turning The Lcd On And Off - Concord eye q 4060 af Bedienungsanleitung

Setting the Time
RETURN
The time is displayed in hour, minute format.
1. Press the joystick
2. Press the joystick
• The selection will blink when it is highlighted.
3. Repeat steps 1 and 2 until the time is set.
4. Press the OK button to set the time by pressing the joystick in.
Note:
The time can be displayed in a 12-hour or 24-hour format. Please go to page.31 to change this setting.
If the battery is removed or dead for more than 4 minutes, the time will return to its default setting.
TURNING THE LCD/ICONS ON AND OFF
The camera has a 1.5" LCD which can frame subjects for image and video clip capture, review stored images
and video clips and to display the current camera settings.
1. Use the (
follows:
Note: In order to save battery power, you may turn off the LCD display in (
LCD icons can be turned on or off.
Downloaded from www.Manualslib.com
ADJUST TIME
01 : 0 1 A M
OK
SET
to change the selection in the blinking position until you reach the desired setting.
to highlight the hour (HH), minutes (MM) or AM/PM.
) button to toggle the LCD mode. The LCD mode changes each time the button is pressed as
manuals search engine
ADJUST TIME
01: 01 A M
RETURN OK SET
Icons off
LCD off
LCD on with icons
8
GETTING STARTED
ADJUST TIME
01: 02 A M
RETURN SET
OK
4 M
28/45
A
AWB N
07 ⁄ 04 ⁄ 03 02:40PM
) Review Mode, only the