Turning The Lcd On And Off; Camera Ready Led Status - Concord EYE Q DUO 2000 Handbuch

Turning the LCD On and Off

By default, the LCD automatically turns on
when the camera is powered on. Press
turn the LCD on or off.
Using the
1. Press once to turn the LCD icons off.
2. Press
3. Press

Camera Ready LED Status

When the Camera Ready LED is:
1. Steady
The camera is in capture mode. Please hold the
camera steady during this time; otherwise, the image
may come out blurry. (fig.1.5)
2. Blinking
The flash is recharging or the camera is in storage mode. You may move
the camera in this mode. (fig.1.5)
Note: Do not open the battery door or turn the power off while the
Camera Ready LED is steady or blinking; otherwise, the images or
video clips in the camera may be damaged.
Downloaded from www.Manualslib.com
Display ON/OFF Button:
again to turn the LCD off.
to turn the LCD on.
A
manuals search engine
to
AWB
16
A
005/080
fig.1.5
1600
T