Tv Mode; Connecting The Camera To The Television; Using The Tv As A Live Viewfinder; Reviewing Pictures And Video Clips On Your Tv - Concord eye q 4060 af Bedienungsanleitung

TV MODE

TV MODE - VIEWING AND DELETING YOUR FILES ON TV
The camera allows you to view individual files and record clips on the television. To begin, check your television
documentation to determine what video standard you should set your camera to either NTSC or PAL.
CAMERA
+
EV COMPENSATIION
–
SETUP
RETURN
Changing the TV Mode setting:
1. Slide the Mode Switch to (
2. Press the MENU button to view the (
3. Press the joystick
4. Press the joystick
5. In the Setup menu press the joystick
6. Press the joystick
7. Press the joystick
8. Press the MENU button to exit.

CONNECTING THE CAMERA TO THE TELEVISION

Connecting the camera to the television:
1. Connect the TV-Out cable into the jack marked VIDEO or VIDEO IN on your
television.
2. Turn on your television.
3. Set the television to video mode according to the instructions in the owner's
manual. (This is usually channel 3, 4 or AV).
4. Turn the camera on by sliding the On/Off Switch (
5. Connect the other end of the cable into the VIDEO port located in the cable
connection panel. (fig.1.1)

Using the TV as a Live Viewfinder:

1. Connect the camera to the TV.
2. Turn the camera on.
3. Slide the Mode Switch to (
4. The TV will become a live viewfinder.
Note: You may record your TV Mode session by using your VCR. Please refer to your VCR documentation
to learn more about recording.

Reviewing pictures and video clips on your TV:

1. In TV Mode, slide the Mode Switch to (
2. Press the joystick
3. To customize your camera settings and to view more options, press the MENU button to display the TV
Menu on the TV screen.
• The TV menu will display the same Delete menu and Setup menu used in the camera. Please refer to
pages 24 and 27 for further information.
Viewing video clips:
1. When an AVI file is displayed on the TV, press the OK button to view.
Downloaded from www.Manualslib.com
SELECT
).
) Main Menu.
until Setup is highlighted.
to enter the Setup menu.
until TV is highlighted
to enter the TV submenu.
to change the setting to NTSC or PAL and press OK.
).
to scroll through the saved pictures and video clips.
manuals search engine
SETUP
SET AUTO OFF TIME
TV OPTION
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
RETURN SELECT
).
).
47
TV OPTION
NTSC
N
PAL
P
OK
RETURN SET
fig.1.1