Turning The Camera On And Off; Checking The Battery Level - Concord eye q 4060 af Bedienungsanleitung

TURNING THE CAMERA ON AND OFF

The Power Switch is located on the top of the camera.
1. Slide the Power Switch toward the (
• The lens cover will open.
• The LCD will turn on automatically
2. To turn the camera off, slide the Power Switch away from (
Note:
To extend battery life, the camera will automaticallypower off after 60 seconds of inactivity. Press the
Shutter button to turn the camera back on.

Checking the Battery Level

There are 5 battery levels that are displayed on the LCD
Note:
• The camera's battery level indicator may not accurately reflect the state of a rechargeable battery even
the chargeable batteries have been fully recharged due to the inherent problem with rechargeable
batteries.
• To extend battery life, the camera will automatically power off after 60 seconds of inactivity. To change
this setting please refer to p.30.
• For better performance, please use NiMH rechargeable batteries.
• Remove the batteries from the camera if they will not be used for an extended period of time to prevent
corrosion or battery leaks.
Downloaded from www.Manualslib.com
fig.1.1 Camera On
Batteries are full
and ready to use.
3/4 battery
capacity remains.
manuals search engine
fig.1.2 Camera Off
) icon to power the camera on. (fig.1.1)
). (fig.1.2)
1/4 battery
capacity remains.
Batteries are low
need to be
replaced soon.
Batteries are
empty, blinking
red and need to
be replaced.
6
GETTING STARTED
1/2 battery
capacity remains.