Setting The Language, Date And Time - Concord eye q 4060 af Bedienungsanleitung

GETTING STARTED

SETTING THE LANGUAGE, DATE AND TIME

When the camera is powered on for the first time, the Language, Date and Time menus will appear.
Setting the Language
1. Turn the camera on.
• The Language Setup screen will appear on the LCD.
2. Press the joystick
3. Press the OK button to select by pressing the joystick in.
4. The next screen will read "Are You Sure?" press the joystick
or Yes.
5. Press the OK button to confirm the selection by pressing the joystick in.
• If you select No, you will return to the Language select screen.
• If you select Yes, all menu screens will be displayed in the new language.
Each language will set the default setting for date format and TV option. To change these settings, please refer
to the Customizing the Camera Settings section on page 30.
Language(s)
English / Español
Français / Deutsch
Setting the Date
ADJUST DATE
01
RETURN
1. Press the joystick
2. Press the joystick
• The selection will blink when it is highlighted.
3. Repeat steps 1 and 2 until the date is set.
4. Press the OK button to set the date by pressing the joystick in.
Note:
• If the battery is removed or dead for more than 4 minutes, the date will return to its default setting.
Downloaded from www.Manualslib.com
to highlight the language you would like to use.
⁄ 01 ⁄ 2003
OK SET
to change the number in the blinking position until you reach the desired setting.
to highlight the month, day or year.
manuals search engine
to select No
Date Format Setting
MM/DD/YYYY
DD/MM/YYYY
ADJUST DATE
01 ⁄ 01 ⁄ 2003
OK
RETURN SET
7
LANGUAGE OPTION
English
Français
Español
Deutsch
RETURN OK SET
TV Option
NTSC
PAL
ADJUST DATE
01 ⁄ 02 ⁄ 2003
RETURN OK SET