Setting The Time; Setting The Lcd Brightness - Concord eye q 4060 af Bedienungsanleitung

CUSTOMIZING THE CAMERA SETTINGS

SETTING THE TIME

1. In the Setup menu, press the joystick
2. Press the joystick
3. Press the joystick
• The selection will blink when it is highlighted.
4. Press the joystick
reach the desired setting then press OK.
Note:
• The time can be displayed in a 12-hour or 24-hour format In (
fixed to 24-hour format. Please go to page 28 to change this setting.
• If the battery is removed for more than 4 minutes, the time will return to its default setting.
• Set Date/Time! will appear on the LCD when the camera is turned on. Press the Shutter button slightly
to turn the reminder off.

SETTING THE LCD BRIGHTNESS

CAMERA
+
EV COMPENSATIION
–
SETUP
RETURN
How to set the LCD Brightness:
1. In the Setup menu, press the joystick
2. Press the joystick
3. Press the joystick
4. Press the OK button to select.
• The camera will return to picture taking mode or review mode.
Downloaded from www.Manualslib.com
until Adjust Time is highlighted.
to enter the options.
to highlight the hour (HH), minutes (MM) or AM/PM.
to change the data in the blinking position until you
SELECT
until LCD Brightness is highlighted.
to display the LCD Brightness bar on the LCD.
/ to adjust the brightness.
manuals search engine
) Review Mode, the time display is
SETUP
SET AUTO OFF TIME
TV OPTION
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
RETURN SELECT
31
ADJUST TIME
01 : 01 A M
RETURN OK SET
LCD BRIGHTNESS
–
+
OK SET