AIPTEK PocketCinema V20 Handbuch Seite 16

Connecting the Projector to your Notebook/PC
Before connecting your laptop PC to projector, you need to have VGA cable ready.
You have three options to supply the projector with power:
1. Using the two USB cables embedded in VGA cable
2. Using the external power supply
3. With internal battery
The two USB cables are not important for data transfer. If you do not have any free
USB ports use the external power supply or batterie to bring power to your projector.
1. Connect VGA cable with the Projector of Notebook/PC interface, at the same time with two
UBS ports for keep supplying power.
2. Turn on Notebook/PC and projector.
3. Press Ctrl+ from keyboard for changing projector mode.
Projector can support computer resolution settings as below:
1024*768(XGA)
800*600(SVGA)
640*480(VGA)
Once you want to use
notebook power take
this cable shown here.
13 13