Setting The Time - Silvercrest SWED 100B1 - IAN 274010 Bedienungsanleitung

SilverCrest SWED 100 B1

Setting the time

You can set the time only when the device is switched off. Switch off the
device with the POWER button (8) if it is switched on. Please note that the
multi-band tuner reverts to standby mode after 5 seconds of inactivity. Any
settings made will be saved.
 First, press the "TIME/MEM" button (15). By pressing the "UP" (6) or
"DOWN" button (14), you can now choose between the 12-hour and
24-hour display. Confirm your selection by pressing the "TIME/MEM"
button (15) again.
 The display now flashes to indicate that you can set the relevant hour.
Set the correct hour by pressing the "UP" (6) or "DOWN" buttons (14).
You can keep the corresponding button pressed to accelerate the digits
count. Confirm your selection by pressing the "TIME/MEM" button (15).
 The display now flashes to indicate that you can set the relevant
minutes. Set the correct minutes by pressing the "UP" (6) or "DOWN"
buttons (14). You can keep the corresponding button pressed to
accelerate the digits count. Confirm your selection by pressing the
"TIME/MEM" button (15).
 The time has now been set.
 If you have selected the 12-hour display, the symbol "PM" (22) appears
on the display (7) once it is past noon.
50 - English
You must adjust the time if you travel to a different time
zone.