Before Getting Started; Inserting The Batteries - Silvercrest SWE 100 B1 - IAN 73607 Bedienungsanleitung

Multi-Band Tuner SWE 100 B1

Before Getting Started

You can power the device on either by using the supplied AA-sized
batteries or by using an optional plug-type power adapter (not supplied).
The power adapter must feature a compatible power plug and output a
voltage of 3V.

Inserting the Batteries

Unplug the power adapter cable if there is one connected to the product.
Open the battery compartment cover [26] on the back panel of the device
by sliding it in the direction of the printed arrow and folding it out. Insert
the batteries with the correct polarity (+ and -). The correct polarity is
labelled on the batteries and beside the battery compartment. Close the
battery compartment cover and slide it in the opposite direction of the
arrow.
The device features a battery level indicator [9]. If it lights yellow, the
batteries are empty. When this happens, replace the batteries with new
batteries of the same type.
120 - English
Do not use both means of power supply at the same
time. Remove batteries when the device is to be operated
using the power adapter.