Connecting A Plug-Type Power Adapter; Getting Started; Powering The Device On/Off - Silvercrest SWE 100 B1 - IAN 73607 Bedienungsanleitung

Connecting a Plug-Type Power Adapter

Remove the batteries from the battery compartment [26] located on the
back panel of the device if any are inserted. Plug the power adapter plug
into the receptacle [21] of the multi-band tuner. Plug the power adapter
into an easily accessible wall outlet.

Getting Started

Powering the Device On/Off

To power the device on, press the On/Off button [8] once. When
powered on, the POWER LED [4] will light green and the device will
display the currently tuned-in frequency and the frequency band (FM,
MW, SW).
To power the device off, press the On/Off button [8] again. When
powered off, the current time will be shown on the display [7].
Remove batteries when the device is not to be used for a
long time.
Multi-Band Tuner SWE 100 B1
English - 121