Window Opening Function; Window Closing Function - JUMO PINOS L01 Betriebsanleitung

9 Startup
9.4

Window opening function

(1) Release point
(2) Switching point
(3) Flow velocity
(4) Hysteresis
The window opening function can be set using three parameters. The principle switching points are de-
fined using the switching point and release point. In addition, hysteresis can also be set for the switching
point and release point. The hysteresis function is deactivated as soon as the hysteresis
parameter >= (Sp - Rsp)/2 is configured.
9.5

Window closing function

(1) Release point
(2) Switching point
(3) Flow velocity
(4) Hysteresis
The window closing function constitutes the inverted function of the window opening function.
30
(4)
1
0
(1)
(4)
1
0
(1)
(4)
(2) (3) [cm/s]
(4)
(2) (3) [cm/s]