Identifying The Device Version; Nameplate - JUMO PINOS L01 Betriebsanleitung

3

Identifying the device version

3.1

Nameplate

Position
Nameplate (A) is laser-etched into the side of the housing. Example follows.
Contents
It contains important information. This includes:
Description
(1) Type (device type)
(2) TN (part no.)
(3) Flow velocity
(4) Voltage supply
(5) Output
(6) F. no.: (serial number)
(7) Nominal pipe width
Device type (type)
Compare the specifications on the nameplate with the order.
Part no. (TN)
The part no. uniquely identifies an article in the catalog. It is important for communication between the
customer and the sales department.
Serial number (F no.)
The serial number indicates, among other things, the production date (year/week).
Example: F no. = 022727640101643
The characters in question are digits 10, 11, 12, and 13 (from the left).
Thus the device was produced in calendar week 10 of 2016.
3 Identifying the device version
Example
406040/000
00123456
10 to 150 cm/s
DC 24 V ±10 %, 10 W
Switching output or analog output (4) to 20 mA
00700338012161400061
DN 40
9