7.2.1
LED display functional description
Analog output option
LED 1 – green LED 2 – red
Device status Error
OFF
ON
ON
Flashing
4 Hz
LED 3 – yellow Description
Switching out-
put
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
7 Display and control elements
Device not active,
no voltage supply connected
Device active,
measuring in progress, analog output active
Device active,
measuring stopped due to an error
Error cause:
•
Temperature at flow sensor too high
(sensor heating is switched off,
flow measurement invalid)
•
Input voltage too low
•
Burden at the analog output too high
•
Flow outside measuring range
(The default setting for behavior in case of mea-
suring range overflow is alarm activation. This
setting can be changed in the setup.)
Communication active via setup,
Errors are not displayed.
23