Akai AC-136KS Bedienungsanleitung Seite 17

Select alarm weekday mode as follows:
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week
Action (during data adjustment):
- Press / Tune - (3) button to adjust data backward.
- Press / Tune + (5) button to adjust data forward.
- Keep depressed
- Use AL1 / AL2 set button to confirm each setting.
ALARM DURATION
Beep alarm or radio alarm will ring for 30 minutes if no key is pressed, then it will
stop automatically and wait for same alarm time on next day.
SNOOZE FUNCTION
- When Alarm rings, press SNOOZE button (4) to suspend the alarm & to
activate the snooze function, Beep or Radio alarm will stop. 9 minutes later the
alarm will ring again. Press SNOOZE key again, alarm will be suspended again,
another 9 minutes later the alarm will ring again and so on until the next alarm
rings.
Note: The interval time of the Snooze function is 9 minutes.
- If you want to disable the SNOOZE function and stop alarm completely,
press Radio ON/OFF button (7). If you don't press any button, the alarm will
ring during 30 minutes & stop automatically.
- Icon of AL1 and AL2 will blink as long as Snooze function is still operating.
Once Snooze is turned off icon of AL1/AL2 stop blinking and lights on the
display.
NAP FUNCTION (count down timer)
In radio off mode, press MEM.SET/M+/NAP (6) button to enter into the NAP
mode, the NAP time 90 will be displayed during 5 seconds. In the meantime,
press repeatedly MEM.SET/M+/NAP (6) button to set the duration time from 90
min to 10 min.
Once time is up, the alarm buzzer will sound for 30 min and then shut off
automatically. To stop the alarm buzzer, press the Radio ON/OFF button (7).
Press the MEM.SET/M+/NAP (6) button has no effect during alarm operation.
Press Radio ON/OFF button (7) to cancel the NAP function.
or button for 2 seconds to enable auto forward.
16