Roger Beep (End-Of-Message Tone); Call Function - Midland Atlantic XT Betriebsanleitung

2) Using the scroll buttons
3) Press PTT[11] to confirm or wait for 5 seconds.
To remove keypad lock repeat the above procedure. At step 2 use the scroll button to select oF.

6.4 Roger Beep (End-of-message tone):

When you release the PTT[11], that is every time you end transmission, Atlantic XT gives out a
sound that indicate to the other party that s/he can start talking. This function is factory set. To
disable the function:
1) Press five times the MENU[17] button; the symbol rb will appear on the display
2) Using the scroll buttons
3) Press PTT[11] button to confirm or wait for 5 seconds.
To reactivate this function repeat the above procedure. Al step 2 use the scroll buttons
to select on.

6.5 CALL Function

The CALL function warns other users tuned in on the same channel of the arrival of a call. To send
the signal to another user press twice button PTT[11]. On the display TX[2] will appear and the
Speaker [14] will give out a sequence of sounds which you have previously chosen.
Atlantic XT gives you the chance to select different tones to send. Tone 1 is factory set.
To select the sequence of tones:
1) Press six times the MENU[17] button; the writing CA will appear on the display
2) Using the scroll buttons
relative tone.
3) Press PTT[11] button to confirm, or wait for 5 seconds.
/ [19] select on
/ [19] select oF
/ [19] select 1, 2 o 3. During selection you will be able to hear the
/ [19]
11