Quick Setup; Connection Diagram - Numark NDX900 Kurzanleitung

BOX CONTENTS
NDX900 Controller
Power cable
RCA cable (stereo)
USB cable
Quickstart Guide
Safety & Warranty Information Booklet
Traktor LE 2 setup guide
Software DVD
Driver CD

QUICK SETUP

1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
•
Audio input sources (i.e. turntables, CD players, etc.)
•
Mixer
•
Last, any amplifiers or output devices
10. When turning off, always reverse this operation by turning off:
•
Amplifiers
•
Mixer
•
Last, any input devices

CONNECTION DIAGRAM

POWER
HOUSE AMP
MIXER
RELAY CABLE
3
POWER