JB Systems CMX-24 Bedienungsanleitung Seite 10

ENGLISH

Press and release the <RECORD/SHIFT> button

[004] appears on the display = fourth scene
The four scenes are now stored in the working memory. Now we will store the working memory in the Preset
B 7 fader of page 1:

Select page 1 by pressing several times on the <PAGINA/REC CLEAR> till the Led 1 will lit.

Press and hold the <RECORD/SHIFT> button

Press and release the <PRESET B 7> button

Release the <RECORD/SHIFT> button
Now you just have stored a chase in the Preset B 7 fader. The working memory has been cleared.

Play a Chase
You can recall the stored chase in Chase/Scenes mode. Be sure that:

Chase/Scenes mode is activated (by using the <MODUS SELECT/REC SPEED> button)

{MASTER B} fader is at its lowest position

{SPEED} fader is at its highest position

{FADER} fader is at its highest position

MIX Chase is activated; make this selection with the <PARK> button above the MASTER B
fader, in Chase/Scenes mode. The [MIX CHASE] Led is situated at the top of the FADE fader,
this must be Lit.

Blackout is not activated

Audio is not activated: press/release the <AUDIO> button till the [AUDIO] Led goes out.

All the preset faders (A & B) are set at their lowest position.
Move the {PRESET B 7} fader upwards. The chase will appear on the green Leds (and on your fixtures).
U can also work with the:

{SPEED} fader, the chase speed will be modified

{FADE} fader: the scene will fade into the next scene. If the fade time is set too high, it can be
possible that the lamps will not lit at full level, or maybe the chase will not move anymore.

Manual activation of a Chase
Sometimes it is usefull to activate manually every step in a chase.
This can be done in a very easy way:

{SPEED} fader at its lowest position: SHOW MODE

Press and release the <STEP> button, situated at the top of the speed fader.
Each time that you press the STEP button, the next step of the chase will be activated.

Synchronize a Chase
Very often, when you play music, you want to synchronize the speed of the chase with the beat of the music.
The CMX24 offers you the possibility to press twice on a button, so that the interval time between the two
moments will be used as speed setting for the chase. you can do it like this:
Press twice the <TAP SYNC> button on the beat of the music.
The interval time will be used to set automatically the chase speed. The position of the {SPEED} is not
important.
! As soon as you move the {SPEED} fader, the chase time will be controlled again by this speed fader!

Memorize the speed
When several chases are running, the {SPEED} fader, the <STEP> button and the <TAP SYNC> button will
influence all the chases. Sometimes it is useful to program a fix speed, so that the chase can not be
influenced by the speed fader, the step and tap sync buttons while running.
This can be done in a very easy way:

Set the chase time by using the {SPEED} fader or the <TAP SYNC> button.

Be sure that the {SPEED} fader is not set at its lowest position (SHOW MODUS).

Press and hold the <MODUS SELECT/REC SPEED>

Press and release the <PRESET B x> button of the PRESET B fader where the chase is stored

Release the <MODUS SELECT/REC SPEED> button
The chase speed is now stored in the PRESET B fader, together with the chase.
JB SYSTEMS 15/93
®
OPERATION MANUAL
CMX24
ENGLISH
To delete:
To delete the stored speed:

Be sure that the {SPEED} fader is at its lowest position: SHOW MODE.

Press and hold the <MODUS SELECT/REC SPEED> button

Press and release the <PRESET B x> button of the PRESET B fader where the chase is stored

Release the <MODUS SELECT/REC SPEED> button
The time (speed) is erased from the PRESET B fader. Now you can modify again the speed of the chase by
using the {SPEED} fader or the <TAP SYNC> button.

Audio
The CMX24 has a built-in microphone
If you dispose of an audio source (CD player, audio mixer, etc) you can synchronise the speed of the chase
with the sound. Connect the audio source with the LINE IN Cinch connector of the CMX24. Press the
<AUDIO> button till the [AUDIO] Led will lit. Move the {AUDIO FADER} fader till the chase is synchronized
with the music.
To switch off the audio function:
- Press and release the <AUDIO> button till the [AUDIO] Led goes out.

Chase reverse
You can reverse the working direction of a chase. There are 4 possibilities:
ALL REV
All the chases will be reversed.

Press and release the <EDIT/REV ALL> button, the chase direction will be reversed.

Repeat this to reverse again the chase direction.
REV ONE
Only one particular chase will be reversed

Press and hold the <DELETE/REV ONE> button

Press a <PRESET B x> button that is containig a chase.

Release the <DELETE/REV ONE> button
CHASE REV
All the chases that have no speed stored in the preset B fader will be reversed.

Press and release the <UP/CHASE REV> button: the case will be reversed.

Repeat this to reverse again the chase direction.
BEAT REV
All the chases that have a speed stored in the preset B fader will be reversed.

Press and release the <DOWN/BEAT REV> button: the chase will be reversed.

Repeat this to reverse again the chase direction.

To modify a Chase
There are 3 ways to modify a chase. You can:
A. Modify the output levels
B. Add scenes
C. Delete scenes
A. Modify the output levels:

Be sure that the program mode is activated.

Be sure that Chase/Scenes is activated.

Bring all the preset A faders to their lowest position

Choose the page by using the <PAGINA/REC CLEAR> button

Set the Preset B x fader in edit mode
Press and hold the <EDIT/ALL REV> button
o
Press and release the <PRESET B x> button
o
o Release the <EDIT/ALL REV> button
The yellow Led on the top of the Preset B fader will Lit while the actual value is shown,
o

Select the scene that you would like to modify by pressing the <STEP> button.
JB SYSTEMS 16/93
®
OPERATION MANUAL
CMX24