Connecting To An Amplifier With A Special Super Woofer Jack - Sony SA-KL50W Bedienungsanleitung

Getting Started
Connecting to the KL-50W series TV
What cords will I need?
Audio connecting cord (supplied) (1)
Hookups
Connect the INPUT L and R jacks of the speaker
system's LOW LEVEL terminal to the KL-50W's audio
output jacks with the supplied audio connecting cord.
ç: signal flow
KL-50W
L/G/S/I
R/D/D/D
Note
When the power of the KL-50W is turned off, turn down the
volume, or turn off the power of the speaker system.
Otherwise, a popping noise may be heard.
6 GB
Connecting to an amplifier with a special
super woofer jack
If your amplifier has audio line out jacks or special
super woofer jack(s) (like a MONO OUT jack, MIX
OUT jack, SUB WOOFER jacks or SUPER WOOFER
jacks), use the LOW LEVEL terminal of the speaker
system.
What cords will I need?
Audio connecting cord (supplied) (1)
Hookups
Connect the INPUT L and R jacks of the speaker
Speaker system
system's LOW LEVEL terminal to the audio line out
jacks or one of the special jacks of the amplifier with
the supplied audio connecting cord.
ç: signal flow
Note
• If the special jack on your amplifier is a single jack (e.g.
• If the sound is not loud enough, the output level of your
Amplifier
LINE OUT
MONO OUT jack) or the audio line out jack is monaural,
connect to the INPUT L jack of the LOW LEVEL terminal.
ç: signal flow
Amplifier
MONO OUT
amplifier may not be high enough. In this case, connect
the speaker jacks of the amplifier directly to the HIGH
LEVEL terminal of the speaker system.
Speaker system
Speaker system