Yamaha YSP-5600 Kurzanleitung Seite 15

1 2 3 4
HDMI1
TV
VOL (+/-)
3D SURROUND
SURROUND
STEREO
TARGET
d
Playback
Enjoying TV
1
Select the desired TV channel.
2
Press the TV key.
• When audio is output from the TV speaker, set TV's audio output to an option
(output to the unit) other than TV. Refor to documentation supplied with TV for
more information.
• HDMI control function
You can use the TV remote control to operate this unit if your TV supports the
HDMI control function. See page 35 in the Owner's Manual.
Playing a DVD or BD
The following explains the playback procedure when this unit is
connected to the TV and BD/DVD player as shown in "Connecting
a TV and BD/DVD player" (p. 8).
1
Turn on the TV and BD/DVD player connected to this
unit.
2
Press the HDMI key to select the BD/DVD player as
the input source.
HDMI1
3
Use the TV's remote control to switch the TV's input
to HDMI 1.
4
Play back a DVD or BD.
5
Press the VOL (+/-) key to adjust the volume.
6
Press the 3D SURROUND, SURROUND, STEREO, or
TARGET key according to your preferences.
See page 38 in the Owner's Manual for details.
When this unit does not play back, check the following
• The unit and BD/DVD player are connected correctly.
• The audio output settings of the BD/DVD player is set to digital sound output
(bitstream).
• The TV's input is switched to this unit.
Input source name
d Playback 15
En