Yamaha soavo-2 Bedienungsanleitung Seite 4

<Bi-wired connections>
When connecting the speaker cable, you must remove the jumper cable.
To connect the speaker to the output
terminals of the amplifier, two pairs
of cables for each of the woofer and
the tweeter are used instead of
standard connections. This type of
connection decreases the
modulation distortion caused by
electric resistance of the cables and
driving current of the speakers.
Consequently, purer sound quality
can be expected.
When using a banana plug
1
Unscrew the terminal knob.
2
Remove the cover by pulling it toward you.
Terminal
4
En
When your amplifier has only one
set of speaker output terminals.
Amplifier
SPEAKERS
R
L
+ – –
Soavo-2 (R) Soavo-2 (L)
Black (–)
Jumper cable
2
1
When your amplifier has two sets
of speaker output terminals.
+
Soavo-2 (R)
Tweeter terminals
Woofer terminals
3
Tighten the terminal knob.
4
Simply insert the banana plug into the terminal.
Banana plug
Both SPEAKERS A and
B should be connected.
Amplifier
SPEAKERS
R
L
A
+ – – +
B
Soavo-2 (L)
Red (+)
4
3