Inhaltsverzeichnis; Supplied Accessories; Placing The Speaker - Yamaha NS-C500 Bedienungsanleitung

CONTENTS
SUPPLIED ACCESSORIES ............................3
PLACING THE SPEAKER ..............................3
CONNECTING TO YOUR AMPLIFIER ...........4
ATTACHING THE GRILLES ...........................5
SPECIFICATIONS ...........................................5

SUPPLIED ACCESSORIES

After unpacking, make sure that the following accessories
are included.
Grille (x2)
The grilles are detached from the speaker and packed
separately. Be careful not to lose them.

PLACING THE SPEAKER

Place the speaker on a TV rack or other stable surface,
and place it just under the center of the TV or screen.
Presence
Front
NS-C500
Center
Surround
Notes
• To avoid accidents resulting from tripping over loose
speaker cable, affix them securely to the wall.
• Secure placement and installation is the owner's
responsibility. YAMAHA shall not be liable for any accident
caused by improper placement or installation of speakers.
• Placing the speakers too close to a CRT-type TV may impair
the picture color or cause a buzzing noise. In this case, move
the speakers away from the TV. This is not an issue with
LCD and plasma TVs.
■
Mounting the speaker on the Yamaha
YTS-F500/T500 TV stand
You can use the screw holes [diameter: 6 mm (1/4"), hole
depth: 16 mm (5/8")] on the rear of this unit to mount the
speaker on the YTS-F500/T500. For installation details,
please refer to the owner's manual that came with the YTS-
F500/T500.
Subwoofer
NS-C500
Surround
back
NS-C500
Notes
• Do not install the speaker on a wall using nails, adhesives, or
any other unstable hardware. Long term use and vibration
may cause it to fall.
• Be careful not to pinch the speaker cables between the
speaker and the speaker bracket or speaker stand.
• Do not lean or place any object on the speaker. Otherwise,
the TV stand bracket may be deformed.
290 mm (11-3/8")
Rear view
Insert screws
"D (M6 x 16)"
that came with the
YTS-F500/T500
into the screw holes.
Use speaker bracket "B"
that came with the
YTS-F500/T500.
(Installation example
using YTS-F500)
3
En