Yamaha ISX-B820 Restio Handbuch Seite 17

Set the alarm time and alarm type
Top panel
AUTO
1
DIMMER
USB
VOLUME SOURCE ALARM
6 4 17
Note
The alarm setting will be erased if the system is turned off without properly
completing it.
1
Press and hold ALARM.
The alarm indicator (
2
Press to set the alarm time.
/
Using the remote control
Press / .
3
Select the alarm type with the ALARM TYPE
switch on the rear panel.
For details on alarm types, refer to P. 14.
Rear panel
4
(when alarm types other than BEEP are selected)
Press SOURCE to select music source.
Sources other than AUX and Bluetooth can be selected.
Using the remote control
Press Source button to select music source.
Notes
• If iPod/CD/USB has been selected, connect/insert the audio source
(iPod, audio/data CD, USB device) to the unit.
• If source cannot be played back at the time set for the alarm (eg. iPod
is not connected), the beep sound is played back.
SOURCE + BEEP
2 SET 2 BEEP
1 SOURCE
CLOCK ALARM TYPE
LABEL SIDE
SNOOZE SLEEP PRESET
5 2
) and set alarm time will flash.
Alarm time
Alarm indicator
SOURCE+
BEEP
BEEP
SOURCE
5
(when alarm types other than BEEP are selected)
Specify the track, folder or FM station to be played.
If iPod is set as the source:
No settings required.
If CD/USB/FM is selected as the source:
Press PRESET to select the track (audio CD), folder (data
CD/USB devise) or FM station to be played.
Using the remote control
Press PRESET
y
• When iPod is set as the source, the unit plays back the "ALARM
Yamaha DTA" playlist at the set alarm time. If this playlist cannot be
found within the iPod, the unit resumes play from the last track you
played (resume).
• When CD/USB/FM is selected as the source and "0" is set, the
playback resumes from the track/FM station you listened to last time
(resume).
6
Set the alarm volume by pressing VOLUME –/+.
7
Press ALARM to complete setting the alarm.
The alarm will be set, and the alarm indicator (
light up.
USING THE ALARM FUNCTION
/ .
Alarm volume
) will
15
En