General Operation - AEG SRC 4321 Bedienungsanleitung

Attention:
• Never use different battery types or new and
used batteries together.
• Batteries must not be disposed of in the gar-
bage. Please bring used batteries to compe-
tent collection centers or back to the dealer.
Warning:
Never expose batteries to high temperatures
or direct sunlight or throw batteries into fi re
for danger of explosion!
Headphone jack (18)
For headphone operation, use a headphone
with a 3.5mm stereo jack plug, connecting it to
the PHONE jack. The speakers will be muted.

General Operation

Note:
Some buttons you can fi nd as well on the
device as on the remote control. Identical
buttons effect the same function.
Switch device on/off (13/27)
By pressing the STANDBY (POWER) button,
you can put the device into standby mode.
Pressing the button again will switch the device
on.
Display brightness
By the DIMMER L/H switch (15), you can set
the brightness of your display.
Volume
By pressing the VOL+/VOL- (14/24) buttons
you can adjust the desired volume.
Infrared Remote Control
For wireless control within a distance of 5m. If
the distance decreases you should change the
batteries. For proper operation mind a clear
view between the remote control and the sen-
sor on the device.
BBS (10/23)
Amplifi es or reduces basses. To activate or
deactivate the feature respectively, press the
BBS button.
SRC 4321 CD IM all languages 09253 53 SRC 4321 CD IM all languages 09253 53
MUTE (25 on the RC)
For immediate muting of the volume. For
disabling the feature, press the MUTE button
again.
12/24 Hour Toggling (28 on the RC)
By pressing the 12/24 button, you can toggle
between the 12hour and 24hour display modes.
Note:
In the 12hour display, PM = afternoon.
Winter/Summer Time Switch (19)
The DST 0/+1 switch toggles between winter
and summer time.
According to the season, move the DST 0/+1
switch in the corresponding position before set-
ting the time.
0 = winter time (normal time), +1 = summer
time
Setting the time
• Press the TIME SET button (9) and the time
display will fl ash.
• Press the HR button (7) to set the hours.
Press and hold till the desired hour is
reached.
• To set the minutes, press the MIN button (6).
Press and hold the button till the desired
minutes setting is reached.
• Press the TIME SET button again to save the
clock time.
Note:
After about 8 seconds, the digits will stop
fl ashing and the time displayed at the
moment will be saved automatically.
English
53
2008-9-30 18:18:55 2008-9-30 18:18:55