Alde Compact 3010 Betriebsanleitung Seite 9

13. External start (remote connection)
This function is used when you want to start the heating
in the caravan from the outside. In order to use this
function it is necessary to have external start installed
1 Press the button with the arrow
until the "Ext" symbol flashes.
The text "OFF" is shown next to
the temperature in the display.
blinkar
flashes
4 Press the button with the arrow
until you reach standby. Off is
displayed continuously. External
start is activated.
14. Adjustment of programmable start and stop Temperature (see item 15)
Use this function when you want to adjust the time
temperature manually.
1 Press the arrow button until
the symbol for adjusting the
program temperature flashes.
The temperature and the "OFF"
text are shown on the display.
blinkar
flashes
15. Programmable start and stop times
This function is used when you want the boiler to
operate between two specified times, for instance at
night or in the morning. Begin by setting the temperature
you would like the room to be maintained at between
1 Press the button with the arrow
until the symbol for program
times flashes. Press the +/On
button. Start time will be shown.
blinkar
flashes
blinkar
flashes
(see vehicle manual). To activate external start, you
first have to make the bottom row of functions light up
(see item 11.)
2 Press the +/On button. The
text "ON" is shown next to the
temperature in the display.
blinkar
flashes
When external start is activated,
the heater will start with the last
setting, "ON" lights up in the text
field. If 12V is not connected to the
heater, the display will not be lit up
until 12V is connected. The external
start function is still activated.
To activate programmable temperature, you first need to
make the bottom row of functions light up (see item 11.)
2 First press the +/On button.
Then adjust the temperature by
pressing the +/On or the -/Off
button.
blinkar
flashes
Auto
the specified times (see item14). Select OFF in 14.3.
Note if you select 0 for day, the chosen start and stop
times will be applied to every day of the week.
2 Adjust the start time (same
procedure as in item 12.), and
press the "Store" button. Now
adjust the stop time and press
"Store" again. The text field now
displays "OFF".
blinkar
flashes
GB
3 Press the button with the arrow
until the "On" symbol flashes.
Press -/Off.
blinkar
flashes
To switch off external start, go to
the "Ext" symbol in the setting mode
and press the -/Off button.
3 When you have selected the
temperature, press the "Store"
button. The program temperature
symbol flashes and the ON text
is shown next to the temperature
in the display.
blinkar
flashes
3 Press the +/On button to activate
the function. The ON text is dis-
played. If you would like the set
"start" and "stop" times applied
every day set the Day to 0.
9