Alde Compact 3010 Betriebsanleitung Seite 8

10. Temperature
This symbol shows the indoor temperature
at intervals of 0,5 °C.
11. Using the lower menu
In the bottom menu row, you can do things like setting the clock, remote connection, night temperature, autostart of
heater. In order to use the bottom menu row, you have to activate it as follows:
1 Press the button with the arrow
until the symbol for the bottom
menu row flashes.
blinkar
flashes
12. Clock
To set the clock, you first need to activate the lower menu icons (see item 11).
1 Press the button with the arrow
until the clock symbol flashes.
blinkar
flashes
4 Then step to the minute informa-
tion with the arrow button. Minute
flashes. Use the +/On and the
-/Off buttons to set the minutes.
flashes
8
GB
2 Light the menu row up by
pressing the +/On button. The
bottom row of symbols lights up.
blinkar
flashes
2 Press the +/On button. Day
flashes. Use the +/On or the -/Off
button to set the day of the week.
5 Press Store and the time that
your have set is stored.
The example displays Tuesday
08.35
blinkar
This symbol shows the temperature outside in
intervals of 1°C. Note an external temperature sensor
must be added to utilise this function.
blinkar
flashes
3 To deactivate the bottom menu
row press the -/Off button
when the symbols flash. Note
that the bottom row cannot be
deactivated without some other
function being activated.
blinkar
flashes
3 Step through the time information
with the arrow button. Hour
flashes. Use the +/On or the -/Off
button to set the full hour.
blinkar
flashes
If the current to the panel is
interrupted and the battery
backup is not connected, the
clock has to be reset.
Week days: 0-7
1 = Monday,
7 = Sunday
0 = Full week (Start/Stop
time only)
Hours: 0-23
Minutes: 0-59