Guide To The Controls - Miele Professional WS 5240 Container Gebrauchsanweisung

Guide to the machine
On button Y
Off button Z
Key switch
Position A - Operation
This key switch position is used for se-
lecting programmes 1 to 13.
Position B - Supervisor
This key switch position is only ac-
cessible by the supervisor and is used
for selecting all programmes. The display
will show which programme the pro-
gramme selector has been turned to.
Position C - Programming
This key switch position is only ac-
cessible by a Miele engineer for pro-
gramming purposes.
Position D - Unlocking
This key switch position is only ac-
cessible by a Miele engineer for service
purposes.
1
Keys for the key switch positions
Key 1 (2 supplied) for operating levels
A and B.
Key 2 for operating levels
A, B, C.
Key 3 for operating levels
A, B, C, D.
Display
PROGRAMME
>50° C< Main wash
Rinses
The Display content shows after the ma-
chine is switched on. It has up to four
lines, each 40 digits long, showing which
programme has been selected.
After the Programme start:
Time line for the current Prog. block
Planned temperature of the current prog. block.
Name of the current prog. block.
PROGRAMME
60 °C Pre-wash
95 °C Main wash
Name of the following Programme block
Planned temperature of the following prog. block.
7
2 3
1 Universal 50°C
1
3 1100 RPM
Programme number
Prog.name
14 Universal vario
25 °C
Actual temperature
Points to a further display line
«M.-Nr. 06 411 840 - GB - »
à
à