Key Switch Position B, Programme 12; Delay Start, Key Switch Position B Only - Miele Professional WS 5240 Container Gebrauchsanweisung

Operation
Key switch position B, Programme 14
The following parameters can be changed be-
fore the start of a programme if required:
The temperature in 1 °C steps from cold, 15
to max. 95 °C .
The spin speed in steps of 100 rpm from 0,
300 to max. 1100.
Use the 2 cursor button to position the
cursor on the input field for the Pre-wash
temperature, and set the temperature re-
quired with the Plus or Minus button 4 3.
Position the cursor on the input field for
the Main wash temperature, and set the
temperature required with the Plus or
Minus button 4 3.
Position the cursor on the input field for
the Spin speed, and set the spin speed re-
quired with the Plus or Minus button 4 3.
Delayed Start –Key switch position B only
If a later start to a programme is required, this
can be selected using the Delay start button.
To select a delayed start time
Turn the key switch to position B.
Switch on the machine and select the re-
quired programme with the programme se-
lector switch.
The Display shows the following:
PROGRAMME
>95 °C< Main wash
Rinses
Press the Delay start button W.
14 Universal vario
1
3 1100 RPM
Here the display shows the following:
PROGRAMME
Start time >14>:30 hrs
After the start time has been set
press the Start button.
The current time of day is always displayed
first.
The cursor points to the input field for 'hours'.
Select the Start Hour with the Plus or
Minus button 4 3.
Position the cursor on the input field for
minutes and select the minutes with the
Plus or Minus button 4 3.
Note:
Before pressing the Start button the Start time
can be deleted by pressing the Delay start
button again, or by switching the machine off
and then on again.
Otherwise, when the Start button X is
pressed in, Delay start is confirmed, and
the following shows in the display:
PROGRAMME
95 °C Main wash
Start time
When the start time is reached the pro-
gramme proceeds and the Display shows the
programme sequence. If the Delay start but-
ton W is pressed during the programme, the
actual time of day and date are shown.
If the End button 7 is pressed this cancels
the Delay start function.
15
14 Universal vario
14 Universal vario
1
18 : 30 hrs
«M.-Nr. 06 411 840 - GB - »