Repeat Play; Shuffle Play; Enjoying Music According To Your Mood - Sensme; Before Using The Sensme™ Function - Sony FM Bedienungsanleitung

Repeat play

1
Press and hold the multi way encoder.
2
Rotate the multi way encoder to select
"Repeat," then press it.
3
Rotate the multi way encoder to select
the setting, then press it.
The setting is complete.
4
Press (BACK).
The setting is complete and the display
returns to normal reception/play mode.
(with the card remote commander)
1
During playback, press (1) (REP)
repeatedly until the desired setting
appears.
Select
Repeat Track
Repeat Album
Repeat Artist
After 3 seconds, the setting is complete.
To return to normal play mode, select "Repeat
off."

Shuffle play

1
During playback, press and hold
(ZAP/SHUF).
2
Press (ZAP/SHUF) repeatedly until the
desired setting appears.
(with the card remote commander)
1
During playback, press (2) (SHUF)
repeatedly until the desired setting
appears.
Select
Shuffle Album
Shuffle Artist
Shuffle Device
After 3 seconds, the setting is complete.
To return to normal play mode, select "off. "
Note
Playing tracks on shuffle play is selected from a
current USB device.
16
To play
track repeatedly.
album repeatedly.
artist repeatedly.
To play
album in random order.
artist in random order.
device in random order.
Enjoying music according to
your mood — SensMe™
Sony's unique "SensMe™ channels" features
automatically group tracks by channel, and allow
you to enjoy music intuitively.
Before using the SensMe™
function
The following is the basic procedure required to
enjoy the SensMe™ function on the unit.
1 Installing "SensMe™ Setup" and
"Content Transfer" in your computer
First install "SensMe™ Setup" and "Content
Transfer" from the supplied CD-ROM.
SensMe ™
2 Registering a USB device using
"SensMe™ Setup"
Connect a USB device to your computer, and
perform registration using "SensMe™ Setup"
to enable the SensMe™ function on this unit.
SensMe ™
Setup
Tip
Registration can be performed either along with the
installation procedure or after installation.
3 Transferring tracks to the USB device
using "Content Transfer"
In order to group tracks by channel, track
sound patterns need to be analyzed by 12
TONE ANALYSIS™, which is loaded in
"Content Transfer."
With the USB device connected to your
computer, drag and drop tracks from Windows
Explorer or iTunes, etc., to "Content
Transfer."
Content
Transfer
Setup