Coolmatic Function; Holiday Function; Frostmatic Function - AEG S83800CTM0 Benutzerhandbuch

36 www.aeg.com
4. The alarm indicator continue to flash
until the normal conditions are re-
stored.
When the alarm has returned the alarm in-
dicator goes off.
DOOR OPEN ALARM
An acoustic alarm will sound if the fridge
door is left open for a few minutes. The
door open alarm conditions are indicated
by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.

COOLMATIC FUNCTION

If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the COOLMATIC function to chill the
products more rapidly and to avoid warm-
ing the other food which is already in the
refrigerator.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The COOLMATIC indicator flashes.
2. Press the OK button to confirm.
The COOLMATIC indicator is shown.
The COOLMATIC function shuts off auto-
matically after approximately 6 hours.
To switch off the function before its auto-
matic end:
1. Press the Mode button until the
COOLMATIC indicator flashes.
2. Press the OK button to confirm.
3. The COOLMATIC indicator goes off.
The function switches off by se-
lecting a different fridge set tem-
perature.

HOLIDAY FUNCTION

This function allows you to keep the re-
frigerator closed and empty during a long
holiday period without the formation of a
bad smell.
The fridge compartment must be
empty with holiday function on.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The Holiday indicator flashes.
The fridge temperature indicator
shows the set temperature.
2. Press the OK button to confirm.
The Holiday indicator is shown.
To switch off the function:
1. Press the Mode button until the Holi-
day indicator flashes.
2. Press the OK button to confirm.
3. The Holiday indicator goes off.
The function switches off by se-
lecting a different fridge set tem-
perature.
DYNAMICAIR FUNCTION
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The DYNAMICAIR indicator flashes.
2. Press the OK button to confirm.
The DYNAMICAIR indicator is shown.
To switch off the function:
1. Press the Mode button until the DY-
NAMICAIR indicator flashes.
2. Press the OK button to confirm.
3. The DYNAMICAIR indicator goes off.
If the function is activated auto-
matically the DYNAMICAIR indica-
tor is not shown (refer to "Daily
use").
The activation of the DYNAMI-
CAIR function increases the ener-
gy consumption.

FROSTMATIC FUNCTION

To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
The FROSTMATIC indicator is shown.
This function stops automatically after 52
hours.
To switch off the function before its auto-
matic end:
1. Press the Mode button until the
FROSTMATIC indicator flashes.